Used machines

In many cases, machines can be adapted to new tasks by making minor changes (such as software adaptions) while retaining the design (such as machine frames, sensors and drive technology). Therefore, used testing machines are a cost-effective alternative to new purchases.

Servopneumatic testing machine TP 5 HF

• nominal force: 5 kN
• stroke: 12 mm (+/- 6 mm)
• maximum test frequency 35 Hz
• baseplate with T-Slots
• electric travel of traverse
• safety protection
• electronic force- and displacement measurement
• test PC with real-time measurement data acquisition and control
• test software: DYNA-TCC with test modules by arrangement
• Ref. No. X99_1943

Servopneumatic test axis SPIAx/P 1 LCF

• Nominal force: 1 kN
• stroke: 100 mm (± 50 mm)
• maximum test frequency: 10 Hz
• transverse force support optional
• electronic force- and displacement measurement
• testing PC with real-time measurement data acquisition and control
• test software: DYNA-TCC with test modules by arrangement
• Ref. No. X99_7002A

Servopneumatic test axis SPIAx/P 1 LCF

• nominal force: 1 kN
• stroke: 100 mm (± 50 mm)
• maximum test frequency: 10 Hz
• transverse force support optional
• electronic force- and displacement measurement
• testing PC with real-time measurement data acquisition and control
• test software: DYNA-TCC with test modules by arrangement
• Ref. No. X99_7002B

Servopneumatic test axis SPIAx/P 2,5 LCF

• nominal force 2,5 kN
• stroke 300 mm (± 150 mm)
• maximum test frequency 10 Hz
• transverse force support
• electronic force- and displacement measurement
• testing PC with real-time measurement data acquisition and control
• test software DYNA-TCC with test modules by arrangement
• Ref. No. X99_2320-216022

Servopneumatic test axis SPIAx/P 2,5 LCF

• nominal force: 2,5 kN
• stroke: 300 mm (± 150 mm)
• maximum test frequency: 10 Hz
• transverse force support
• electronic force- and displacement measurement
• test PC with real-time measurement data acquisition and control
• test software: DYNA-TCC with test modules by arrangement
• Ref. No. X99_2321-216023

Servo-electric test axis SPIAx/E 2,5 LCF

• nominal force: 2.5 kN
• stroke: 200 mm (± 100 mm)
• electronic force and displacement measurement
• testing PC with real-time measurement data acquisition and control
• test software: DYNA-TCC with test modules by arrangement
• Ref. No. X99_961

Dynamic testing machine DYNAdent

• Electrically driven testing machine for small samples
• nominal force: 300 N
• electronic force- and displacement measurement
• testing PC with real-time measurement data acquisition and control
• test software DYNA-TCC with test modules by arrangement
• Ref. No. X99_2181

Hydraulic power units

• Various hydraulic power units supplied with heat exchanger (oil/air or oil/water)