Used machinery
Used testing machines and testing equipment are a cost-efficient alternative to new investments. Complete overhauled and modernized used machinery by DYNA-MESS are state of the art testing systems with the newest computerized testing software available.
Please use our CONTACT FORM for your inquiry.
Testing machine for sewing needles
- Bending test on sewing needles
- Class 1 calibration and load range from 10 N up to 1 kN
- Automated xy table to adjust the position with a capacity of 20 needles
- Evaluation of tests results via digital control
- DYNA-NT software operating with Windows 2000/XP
1 kN servo-pneumatic test cylinder
- In demonstration our show room
- Stroke: 100 mm (+/- 50 mm)
- Class 1 calibration and load from 20 N up to 1 kN
- Complete test cylinder to be installed on any testing machine
- Can be used for dynamic tests
- Digital control
- DYNA-XP software operating with WindowsXP
- Development of custom test module upon request
Hydraulic power units
- Broad range of hydraulic power units including heat exchanger (Oil/Air or Oil/Water)
Elektronikmodule für Prüfmaschinen-Regelungen
- Diverse Einschubmodule für ServoTronic (Typ DYNA-MESS) : DMA, DMD, DMG, DMV,DMR,..
- Komplettelektronik ServoTronic (Typ DYNA-MESS) mit Regelungsarten "Kraft","Weg", "Dehnung"
- Diverse Einschubmodule für S31-Regelungen (Typ "Schenck")
Used machines
In many cases, machines can be adapted to new tasks by making minor changes (such as software adaptions) while retaining the design (such as machine frames, sensors and drive technology). Therefore, used testing machines are a cost-effective alternative to new purchases.
Servopneumatic testing machine TP 5 HF
- nominal force: 5 kN
- stroke: 12 mm (+/- 6 mm)
- maximum test frequency 35 Hz
- baseplate with T-Slots
- electric travel of traverse
- safety protection
- electronic force- and displacement measurement
- test PC with real-time measurement data acquisition and control
- test software: DYNA-TCC with test modules by arrangement
- Ref. No. X99_1943
Servo-hydraulic testing machine V2H 100 HCF
- nominal force: 100kN
- hydrostatically mounted test cylinder
- stroke: 100 mm (+/- 50 mm)
- maximum test frequency: 100 Hz
- electronic force- and displacement measurement
- test PC with real-time measurement data acquisition and control
- testing software: DYNA-TCC with test modules by arrangement
- Ref. No. X99_1927
Servopneumatic test axis SPIAx/P 1 LCF
%20gebraucht.jpg)
- Nominal force: 1 kN
- stroke: 100 mm (± 50 mm)
- maximum test frequency: 10 Hz
- transverse force support optional
- electronic force- and displacement measurement
- testing PC with real-time measurement data acquisition and control
- test software: DYNA-TCC with test modules by arrangement
- Ref. No. X99_7002A
Servopneumatic test axis SPIAx/P 1 LCF
%20gebraucht.jpg)
- nominal force: 1 kN
- stroke: 100 mm (± 50 mm)
- maximum test frequency: 10 Hz
- transverse force support optional
- electronic force- and displacement measurement
- testing PC with real-time measurement data acquisition and control
- test software: DYNA-TCC with test modules by arrangement
- Ref. No. X99_7002B
Servopneumatic test axis SPIAx/P 2,5 LCF
%20gebraucht.jpg)
- nominal force 2,5 kN
- stroke 300 mm (± 150 mm)
- maximum test frequency 10 Hz
- transverse force support
- electronic force- and displacement measurement
- testing PC with real-time measurement data acquisition and control
- test software DYNA-TCC with test modules by arrangement
- Ref. No. X99_2320-216022
Servopneumatic test axis SPIAx/P 2,5 LCF
%20gebraucht.jpg)
- nominal force: 2,5 kN
- stroke: 300 mm (± 150 mm)
- maximum test frequency: 10 Hz
- transverse force support
- electronic force- and displacement measurement
- test PC with real-time measurement data acquisition and control
- test software: DYNA-TCC with test modules by arrangement
- Ref. No. X99_2321-216023
Servo-electric test axis SPIAx/E 2,5 LCF
%20gebraucht.jpg)
- nominal force: 2.5 kN
- stroke: 200 mm (± 100 mm)
- electronic force and displacement measurement
- testing PC with real-time measurement data acquisition and control
- test software: DYNA-TCC with test modules by arrangement
- Ref. No. X99_961
Dynamic testing machine DYNAdent
- Electrically driven testing machine for small samples
- nominal force: 300 N
- electronic force- and displacement measurement
- testing PC with real-time measurement data acquisition and control
- test software DYNA-TCC with test modules by arrangement
- Ref. No. X99_2181
Hydraulic power units
- Various hydraulic power units supplied with heat exchanger (oil/air or oil/water)
Fairs and Exhibitions 2024
Automotive Testing Expo China 2023
Date: August 28-30 2024
Venue: Shanghai World Expo Exhibition and Convention Center China
Applications
Venue: Shanghai World Expo Exhibition and Convention Center China
Applications
Technische Akademie Esslingen e.V.
TestRig – Prüfstandsbau und Prüfstandsbetrieb
DKOU: Deutscher Kongress für Orthopädie und Unfallchirurgie
Nacht der Unternehmen
Outlook 2025
IDS: Internationale Dental-Schau 2025
Date: March 25-29 2025Ort: Koelnmesse, Cologne, Germany
Hall 4.1, Stand A-051
Applications
Past Events 2024
1st Symposium on Bio-Tribology & Related Medical Devices
13. Jahrestagung der Deutschen Gesellschaft für Biomechanik e.V.
India Rubber Expo
TestingExpo Korea
32nd International Colloquium Plastics Technology
Fairs and Exhibitions 2023
"Aachener Industrie-Dialog"
Unternehmertag
COMPAMED Düsseldorf
Date: November 13-16 2023Venue: Messe Düsseldorf, Germany
Hall 8b/K03 joint stand Federal Ministry of Education and Research
Medical Applications
Automotive Technology Expo 2023
Date: October 25 - 27 2023Venue: Seoul, Korea
Applications Automotive
Nacht der Unternehmen 2023
Date: October 17 2023Venue: Technologiezentrum am Europaplatz, Aachen
Job Offers
Automotive Testing Expo China 2023
Date: August 09 - 11 2023Venue: Shanghai, China
Applications Automotive
BUTECH: Busan International Machinery Fair 2023
Date: March 16 - 19 2023Venue: Busan, Korea
Products
IDS: Internationale Dental-Schau 2023
Date: March 14 -18 2023Venue: Koelnmesse, Cologne, Germany
Hall 4.1, Stand D026
Applications
Training
DYNA-MESS offers comprehensive training for operators and end-users of our testing machines who would like to have more detailed technical information about computer-controlled material testing and deeper knowledge about our testing software.
Our experienced staff of instructors provides practical hands-on experience.
Please download your application form (German) here.
2024
Tuesday, September 10 2024
Seminar "DYNA-TCC software"
Tuesday, December 10 2024
Seminar "DYNA-TCC software"
Location
The training is provided at our facilities in Aachen or at your location (upon request).
Need accommodation?
Please find our hotel recommendations below:
